ページを印刷するFog machine PT-1500 Art.No
4.1.2. Wireless Remote
Wireless Remote
Connect the receiver with the device by using the
If you want to use several devices you can assign up to 4 devices to one
If you want to use several devices you can assign up to
remote, by using the receiver
1. LED
2. Dipswitches
3. LED
2. Fog button 1- 4
Art.No.: 114082
with the device by using the INPUT "Wireless Controller".
eceivers.
This LED lights green if the device is heated up
This LED lights green if the device is heated up
and ready to use.
You can assign the receiver to different buttons
You can assign the receiver to different buttons
or channels of the remote. CH1 (Dipswitch 1:
On; Dipswitch 2 -4: Off); CH2 (Dipswitch 2: On,
Dipswitch 1, 3 – 4: Off); CH3 (Dipswitch 3: On,
Dipswitch 1 – 2,4: Off); CH4 (Dipswitch 4: On,
Dipswitch 1- 3: Off).
This LED lights red while the device is heating
This LED lights red while the device is heating
up.
With the buttons CH1 – CH4 you ca
the fog output. Before this you have to assign
the fog output. Before this you have to assign
the receivers to the different buttons.
the receivers to the different buttons.
9 / 12
INPUT "Wireless Controller".
4 devices to one
CH1 (Dipswitch 1:
ff); CH2 (Dipswitch 2: On,
4: Off); CH3 (Dipswitch 3: On,
2,4: Off); CH4 (Dipswitch 4: On,
you can activate