- ページ 3

フォグマシン djpower DFZ-800のPDF マニュアルをオンラインで閲覧またはダウンロードできます。djpower DFZ-800 12 ページ。 Fazer

ページを印刷する

1. Safety instructions

• This Device is suitable for indoor use only.
This Device is suitable for indoor use only.
• All modifications will void the warranty.
All modifications will void the warranty.
• Repairs have to be carried out by skilled personnel only.
Repairs have to be carried out by skilled personnel only.
• Only use fuses of
Only use fuses of the same type and original parts as spare parts.
• Protect the Unit from rain and humidity to avoid fire and electric shocks.
Protect the Unit from rain and humidity to avoid fire and electric shocks.
Protect the Unit from rain and humidity to avoid fire and electric shocks.
• Make sure to unplug the power supply before opening the housing.
Make sure to unplug the power supply before opening the housing.
Make sure to unplug the power supply before opening the housing.

Instructions for a safe and efficient operation

Instructions for a safe and efficient operation
1.1.
Be careful with heat and extreme temperature
at and extreme temperature
Only use the device in a place where no extreme temperatures will occur.
Only use the device in a place where no extreme temperatures will occur.
Do not keep it in a temperature bellow 32
Do not keep it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.
Avoid exposing it to direct rays of the sun or near a heating appliance.
Avoid exposing it to direct rays of the sun or near a heating appliance.
Keep away from humidity, water and dust
way from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Do not place the set in a location with high humidity or lots of dust.
Containers with liquid should not be placed on the set.
Containers with liquid should not be placed on the set.
Avoid placing it on un-stable location
stable location
Select a level and stable location to avoid vibration.
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust. Metal Parts can be cleaned with a wet soft cloth for stubborn
Use a clean dry cloth to wipe off the dust. Metal Parts can be cleaned with a wet soft cloth for stubborn
Use a clean dry cloth to wipe off the dust. Metal Parts can be cleaned with a wet soft cloth for stubborn
dirt.
If out of work, contact sales agency soon
If out of work, contact sales agency soon
If any troubles occurs, remove the power plug immediately, and contact with an engineer for repairing,
If any troubles occurs, remove the power plug
do not open the cabinet by yourself, it might result a danger of electric shock.
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold th
Never pull the power cable to remove the plug from the receptacle, be sure to hold th
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
using the device for an extended period of time, be sure to disconnect the plug from the receptacle.
using the device for an extended period of time, be sure to disconnect the plug from the receptacle.
using the device for an extended period of time, be sure to disconnect the plug from the receptacle.
IMPORTANT:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems. Make sure the electrical connection is carried out
resulting defects or problems. Make sure the electrical connection is carried out
resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
by qualified personnel. All electrical and mechanical connections have to be carried out according to
by qualified personnel. All electrical and mechanical connections have to be carried out according to
the European safety standards.
the same type and original parts as spare parts.
immediately, and contact with an engineer for repairing,
3 / 12