ページを印刷するFog Machine H-2VD
4. First use
ATTENTION!
Before using the device for the first time, remove all packaging materials.
1. After checking that the device is intact and complete, please place it
on a flat surface.
2. Fill the tank with fluid! Please only use the recommended fluid,
otherwise the device may be damaged and the guarantee will be
void. Make sure that there is always enough fluid in the tank.
3. Connect the device to the mains.
4. The device starts to heat up. This process takes 9 minutes, during which
time the display shows "Warming up".
5. The heating process is complete. "Ready TO Fog" appears on the
display.
4.1. Control
It is operated via the display or via DMX.
MENU
UP / TIMER
DOWN / VOLUME Select a menu item or decrease a value. Start
ENTER / STOP
Calling up the menu structure to make individual
settings.
Select a menu item or increase a value. Activate the
timer.
manual ejection.
Confirm the selection or the setting made. Stop
manual ejection.
10 / 18