- ページ 2
リモコン Custom Dynamics CCM-5BTのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Custom Dynamics CCM-5BT 9 ページ。 Bluetooth remote
ページを印刷するBrake Mode Important Notes: The Brake mode will interrupt the light programming and change to red when the
brake is applied. Brake function will function on lighting system even if lights are off, a kill switch is recommended.
Do NOT wire in after a Magic Strobe™ brake flasher, only before to prevent accent lights from flashing during
braking. If you decide not to use this feature, disconnect the wire and cap off to prevent shorting.
Installation Continued
8.
Once wiring is completed, clean up installation and secure the module.
9.
Re-connect the negative battery terminal, then use the Key Fob to test the
LEDs. See page 3 for Key Fob features.
For joining large quantities of wires, we recommend using cage
clamp connectors (included with all Magical Wizard™ lighting kits).
The cage clamps offer easy connection of the LEDs to the CCM
Remote. Strip back enough insulation on the wires and follow the
diagram below.
Cage Clamp #1
Black Wires From
LEDs
12V Battery
Vehicle Brake Wire (Optional)
Questions? Call us at: 1 (800) 382-1388
Installation Instructions - Page 2
Cage Clamp #2
Red Wires From
LEDs
Fuse
Winter Kill Switch
Switch
LED Positive Power [ + ]
Black
Red
Red LED Negative [ - ]
Blue
Cage Clamp #3
Blue Wires From
LEDs
Green
Blue
Orange
Red
Custom Dynamics®
White
Red/fuse
Black
Yellow
M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Magical Wizard™
4 Wire LED Pod
Blue LED Negative [ - ]
Cage Clamp #4
Green Wires From
LEDs
Custom Dynamics®
CCM Remote
CCM-5BT
CCM
CCM Remote
Controller
09-2017