- ページ 3
メディア・コンバーター Altronix NetWaySP1BTWPNのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Altronix NetWaySP1BTWPN 8 ページ。 802.3bt media converter/injectors
Altronix NetWaySP1BTWPN にも: インストレーション・マニュアル (12 ページ)
![Altronix NetWaySP1BTWPN インストレーション・マニュアル](/uploads/products/server2/863179/863179.jpg)
Altronix NetWaySP1BT and NetWaySP1BTWPN 802 .3bt media converter/injectors provide a single 802 .3bt
(4PPoE) port up to 90W and accommodate Fiber (1000Base-X/SX/LX) or structured cable to transmit data . Units
can be deployed with structured cable, conventional single/multimode fiber or composite cable (fiber + copper
combined) . Cameras/edge devices may be located up to 100m from the unit .
Agency Listings:
• CE European Conformity .
Input:
• 48-56VDC @ 1 .9A (95W) .
* See below for recommended
Power Sourcing Equipment.
Fiber Port:
• One (1) 1Gb SFP port .
** See below for recommended SFP modules.
PoE Port:
• Single port rated up to 90W max .
• IEEE 802 .3af, 802 .3at and 802 .3bt compliant .
Data Port:
• Connectivity: RJ45, auto-crossover .
• Wire type: 4-pair CAT5e and higher .
• Speed: 10/100/1000 Mbps .
• Distance: up to 100m .
Recommended Altronix Power Sourcing Equipment:
NetWaySP4P
Ethernet to Fiber Media Converter with Integral Power Supply/Charger .
Four (4) 56VDC non power-limited outputs up to 120W max . full power per port
(240W total power) . Four (4) 1Gb SFP ports .
NetWaySP4PX Ethernet to Fiber Media Converter with Integral Power Supply/Charger .
Four (4) 56VDC non power-limited outputs up to 120W max . full power per port
(480W total power) . Four (4) 1Gb SFP ports .
NetWaySP4P2 Ethernet to Fiber Media Converter with Integral Power-Limited Power Supply/Charger .
Four (4) 56VDC power-limited outputs up to 60W max . full power per port
(240W total power) . Four (4) 1Gb SFP ports .
WayPoint562
High Current Outdoor Power Supply/Charger .
56VDC/120W output .
Filtered and electronically regulated output . Short circuit and thermal overload protection .
Vertiline563
EIA 19" 1U Rack Mountable Dual Independent Power Supply/Charger .
56VDC @ 3A each output .
Filtered and electronically regulated output . Short circuit and thermal overload protection .
PoE201
Power Supply/Charger Board .
56VDC/120W output .
Filtered and electronically regulated output . Short circuit and thermal overload protection .
Altronix P1MM, P1SM10, P1AB2K and P1GCE are hot-pluggable SFP fiber transceiver modules and are readily
usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates .
P1MM
For use with Multi-Mode Fiber for distances up to 550m .
P1SM10 For use with Single-Mode Fiber for distances up to 10km .
P1AB2K For use with Single Strand Single-Mode Fiber for distances up to 2km .
P1GCE
For use with CAT5e or better for distances up to 100m .
NetWaySP1BT Series
Recommended Altronix SFP Modules:
Overview:
Features:
Environmental:
• Refer to Environmental Conditions on page 5.
LED Indicators (Refer to Fig. 4, Pg. 4):
• Yellow and Green LEDs (RJ45 jacks):
Yellow (left) LED: 10/100 Mbps .
Green (right) LED: 1000 Mbps .
• Green PoE LEDs: Indicate PoE present .
• Green SFP (Fiber) LED: Indicates SFP connection .
Mechanical:
NetWaySP1BT:
• Modular plastic case .
3 .375" x 3 .8" x 1" (85 .7mm x 96 .5mm x 25 .4mm) .
NetWaySP1BTWPN:
• NEMA4/4X, IP66 Rated enclosure for outdoor use .
• Dimensions (H x W x D approx .):
9 .5" x 7 .32" x 4 .92"
(241 .3mm x 185 .9mm x 125mm)
- 3 -