- ページ 6

レシーバー ALTUS APS-3のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ALTUS APS-3 8 ページ。 Positioning systems
ALTUS APS-3 にも：クイック・スタート・マニュアル (8 ページ), クイック・スタート・マニュアル (2 ページ)

Communicating with APS-3

Serial cable communication takes precedence over

Bluetooth®. Remove serial cable from SER 1 port for

Bluetooth to resume.

For Wireless Bluetooth® communications with the

the steps below with a Controller (Allegro², Archer², ...). Refer

to APS-3 User Manual for variations in controllers.

1. Turn on the APS-3. The

LED below the satellite icon starts to flash.

2. Turn on the Controller and Run data collection software.

Be sure to select the appropriate APS-3 model.

The model is indicated by the product serial number.

Select APS-3 for 10XXX series and APS-3 V2 for 20XXX series.

For SurvCE go to step 3. For FIELDGenius go to step 6.

3. SurvCE: Go to the Equip tab and select GPS Rover.

4. In the Current Tab, select Manufacturer and Model.

5. In the Comms Tab, select Bluetooth as the Type. Select the

Configure button. Select Find Receiver, and a Bluetooth® Device

search occurs. Highlight the APS-3 name then select the

Bluetooth® button to bond.

6. FIELDGenius: In the Instrument selection screen, select GPS Rover

and select Edit.

7. Select Model and Communication. Choose the Make & Model.

Select Bluetooth Search and a Bluetooth® Device search occurs.

Select the APS-3 name, enter Bluetooth pin 'default', select OK,

then select Connect to bond.

red

LED will turn on and the

-3 follow

APS

green