- ページ 8

アンプ Artist Guitars TWEEDTONE20RのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Artist Guitars TWEEDTONE20R 9 ページ。

TWEEDTONE20R

12. Standby Switch

This switch puts the ampliﬁer in or out of standby mode. When it's

switched to the Standby position, the ampliﬁer circuitry will be active

and the ampliﬁer will power up, but there won't be any sound present.

This allows the tubes in the ampliﬁer to warm up before use and prevents

any loud pops or other noises when the ampliﬁer is powered down. It's

recommended to put the amp in standby before powering up and again

before turning off.

13. Power Switch

This switch turns the ampliﬁer on and off.

TECHNICAL SPECIFICATION

Output Power: 20W(RMS)

Speaker: 1 x 12 inch, Celestion 70/80 Speaker

Speaker OHM: 8 ohm

Tubes:

• 2 x EL84 Power Tubes

• 3 x 12AX7 Preamp Tubes

Dimensions: 495mm W x 445mm H x 255mm D / 19.5in W x 17.5in H x

10in D

Weight: 18.5kg / 41 lbs

Power Consumption: 85W

Power Plug: (See our blog post for more details)

• AU & NZ: 240V with AU/NZ Plug

• UK: 230V with a UK plug (with a 13a fuse in the plug)

• USA: 120V with a USA 3 pin plug