- ページ 2

電動おもちゃの車 CustomWorks INTIMIDATOR GSX2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CustomWorks INTIMIDATOR GSX2 17 ページ。 Racing kit

ページを印刷する

REQUIRED READING... ... ... ... ...

REQUIRED READING

Thank You and Congratulations on purchasing the INTIMIDATOR GSX2

a race winning car with over 21 years worth of CUSTOM WORKS

to realize this race car's winning potential it is important to follow the written text along with the

pictures included. The steps required to build this car are very easy, as long as you read before you

build.

The instructional format for building this car is to open each bag in alphabetical order. Each bag of

parts will be broken down into "Steps" in the manual. All parts and hardware needed to complete all

steps for each separate bag, will be found in each individual bag. There is no need to steal screws

from other bags. In the rare event you need to look in a different bag for a certain part, it will be

noted clearly.

Considering the various dirt or clay surfaces that Nitro Dirt Oval cars are raced on today, the

INTIMIDATOR GSX2 has been designed to be competitive on high bite and well groomed clay tracks

with rubber or foam racing tires. The instructions will build the kit using the most verastale set-up

Custom Works has found in testing on different types of tracks, however there are various other

suspension configurations available to you that you may find more suitable for your local track. For

updates and more proven set-ups login to CustomWorksRC.com.

All hardware (screws, washers, nuts, etc...) are referred to by size and type in the instructions. To

help clarify which screw or nut the instruction is calling for refer to the HARDWARE REFERENCE

supplement. The size of the screw or nut should match the "shadow" of the same piece very closely.

Screw ID's are: FH

FH=Flat Head BH

BUILDING TIPS:

-Using some type of thread locking fluid is suggested for all parts where metal screws thread into other

metal parts. We suggest using a lite setting strength thread lock for the reason you may want to take

the screw out one day. Remember it only takes a very small amount to secure the screw.

NOT

-Do NOT

NOT use power screwdrivers to drive screws into parts. The fast rotation speed can easily melt and

NOT

strip plastic parts or cross-thread into the aluminum parts.

-Lightly sand the edges of graphite pieces using a medium grade sandpaper to avoid splinters. Run a

thin bead of Super Glue around the edges to give pieces greater durability.

400 Grit Sandpaper

Hobby Scissors

Small Needle Nose Pliers

UNDERSTAND THIS MANUAL!

INTIMIDATOR GSX2

INTIMIDATOR GSX2! Within this kit you will find

CUSTOM WORKS

CUSTOM WORKS design and quality. In order for you

BH=Button Head SH

SH=Socket Head SS

SUGGESTED TOOLS

Wire Cutters

X-Acto Knife

Phillips Head Screw Driver

SS SS=Set Screw

SS SS

Blue Loctite

3/16" Wrench