- ページ 4
電動おもちゃの車 CustomWorks NITRO ROCKET KIT 0715のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CustomWorks NITRO ROCKET KIT 0715 16 ページ。
ページを印刷するSTEP #2
- Insert the 7200 Axle into the
3202 Steering Arm so the
holes are in-line.
-Align the Steering Arm into
the 3410 Castor Block and
press the 7209 Ball Stud
Kingpin thru the assembly
as shown.
3410
4241
1255
5230
-Mount the Castor Block to the Susp Arm with a
5230
1255 Spacer on each side of the Castor Block as
it is fitted between the ears of the Susp Arm.
-Insert the 4241 Susp Pin thru the Susp Arm,
Spacer, and Castor Block. Retain by attaching
5230 E-Clips to each end of the 4241.
Bag C
Bag C
Bag C
Bag C
Bag C
Rear Suspension
Rear Suspension
Rear Suspension
Rear Suspension
Rear Suspension
-Parts for
Step#1
1273
Qty 1
Rear Bulkhead
-Parts for
Step#2
3254
Long Rear Susp Arm
STEP #1
-Attach the 3257 Long Shock Ears to
the 1273 Bulk to the side facing away
in the diagram.
-Attach the 3305 Tail Tank Tray as
shown in the diagram.
3257
1273
7209
7209
Spacer
5004
3202
5230
1255
7209
Spacer
1255
3257
Qty 2
Tall Shock Ear
Qty 2
2230
Qty 2
3 Deg Toe Block
3257
5254
5253
STEP #3
8122
BOTH SIDES.
-8122 MOUNTS IN
OUTER HOLES ON
7200
- Thread the 8122 Ball Stud into the front face of 3304
Steering Slide, back face of the shock tower, and top face
of the Steering Arm as shown.
-Insert the Steering Slide into the 3304 Steering Rack,
mount the rack to the chassis.
-Mount the linkages from Step #1 by snapping the Ball
Cups onto the Ball Studs.
3305
Qty 1
Tail Tank Tray
4234
Qty 2
Rear Inner Susp Pin
STEP #2
-Attach the 3254 Susp
Arm to the 2230 Toe
Block using the 4234
Susp Pin.
-Retain the pin with 5230
E-Clips.
-Make a RIGHT and LEFT
assembly!
-NOTE: Back side of Toe
Block for proper direction!
3305
8122
3304
3304
8122
5262
1:1
5254
Qty 6
5263
4-40 x 1/2 BH Screw
4-40 x 3/8 FH Screw
1:1
5264
Qty 6
4-40 x 1/2 FH Screw
5264
5230
2230
4234
-LEFT Side Assembly Shown.
8122
8122
8122
-USE 5217 LOCKNUTS
TO RETAIN
1:1
1:1
Qty 4
5253
Qty 2
4-40 x 3/8 BH Screw
1:1
5230 Qty 24
E-Clip
5264
5263
3254