- ページ 7

コントロールパネル ArtiVisuals Mix-iTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ArtiVisuals Mix-iT 14 ページ。

Side Panel

1. Network connector

2. Power input

3. Option port

Before you connect Mix-iT, be sure that the vMix software is started on your PC.

The Mix-iT controller needs a network connection to vMix, this can be realized

with a cable direct to the PC, or via a network hub or switch that connects both

devices.

The Mix-iT kan be powered with the supplied mains-adapter (7.5V, 500mA), or

through Power over Ethernet (PoE) if your network switch supports this.

Power up Mix-iT by either connecting the adapter to the mains or by connecting

the network cable with Power over Ethernet. The panel now tries to connect to

vMix, if this succeeds the Mix-iT model is shown in the LCD. If no connection can

be established, a message appears in the screen. Check cabling and IP settings.

User Guide Mix-iT for vMix v1.0

- 7 -