- ページ 11
MP3プレーヤー Akman SR4のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Akman SR4 15 ページ。 Mp3 audio player
ページを印刷するIf only JP3 is ON (shorted) board address is 2.
If only JP4 is ON (shorted) board address is 4.
If JP2, JP3 and JP4 are all ON (shorted), the board address is 7.
After powering up, one of the LED will be on to indicate the board address.
HOW TO CONNECT PUSH BUTTONS INTO THE IN6 BOARD:
For wiring diagram please visit out web site and download the IN6 wiring diagram.
The input board has 1 ground terminal, 6 input terminals and 1 UP terminal. There are a total of 8
terminals. Facing the green terminals from left to right:
The first terminal is GROUND.
IN1 is the second terminal. To trigger input #1, momentarily short IN1 to ground. Line
0100xx=xxx.mp3 in the autoplay.txt will play.
IN2 is the third terminal. To trigger input #2, momentarily short IN2 to ground. Line
0200xx=xxx.mp3 in the autoplay.txt will play.
IN3 is the fourth terminal. To trigger input #3, momentarily short IN3 to ground. Line
0300xx=xxx.mp3 in the autoplay.txt will play.
IN4 is the fifth terminal. To trigger input #4, momentarily short IN4 to ground. Line
0400xx=xxx.mp3 in the autoplay.txt will play.
IN5 is the sixth terminal. To trigger input #5, momentarily short IN5 to ground. Line
0500xx=xxx.mp3 in the autoplay.txt will play.
IN6 is the seventh terminal. To trigger input #6, momentarily short IN6 to ground. Line
0600xx=xxx.mp3 in the autoplay.txt will play.
The last terminal is UP. Use this input to trigger IN7 to IN12 as follows:
To trigger input #7, momentarily short IN1 and UP together to ground. 07 in the autoplay.txt will play.
To trigger input #8, momentarily short IN2 and UP together to ground. 08 in the autoplay.txt will play.
To trigger input #9, momentarily short IN3 and UP together to ground. 09 in the autoplay.txt will play.
To trigger input #10, momentarily short IN4 and UP together to ground. 10 in the autoplay.txt will
play.
To trigger input #11, momentarily short IN5 and UP together to ground. 11 in the autoplay.txt will
play.
To trigger input #12, momentarily short IN6 and UP together to ground. 12 in the autoplay.txt will
play.
STD MODE, IN6 INPUT BOARD OPERATION:
Set JP1 to OFF (no shorting bar). When an input is triggered, the IN6 board will send a command to
the SR4 to play the same input as listed in the autoplay.
Example:
If input 1 is triggered, the IN6 will send an instruction to the SR4 to play line 01 in the
autoplay.txt.
If input 3 is triggered, then In6 will send a command to the SR4 to play line 03 in the
autoplay.txt.
If input 12 is triggered, then In6 will send a command to the SR4 to play line 12 in the
autoplay.txt.
IR MODE, IN6 INPUT BOARD OPERATION:
If JP1 to ON (shorting bar is ON), then the IN6 input will become an IR input and send the following
IR commands to SR4 when triggered:
IN1 is now NEXT.
IN2 is now Prev. (Previous).
IN3 is now STOP.
IN4 is now Pause/Play.