- ページ 11

タッチパネル Alula RE657WF-RのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alula RE657WF-R 12 ページ。 Flat mount touchpad

Pro Tips

The Touchpad display turns off on its own after specified allotted time of inactivity

(Auto sleep display setting). It will turn back on when the screen is touched, or for some

alarm conditions. The screen can also be turned off manually by pressing "Sleep."

The Touchpad volume can be changed in the Settings screen. The physical volume rocker

switch on the top left side of the Touchpad is not enabled.

The Touchpad can be rebooted by holding the power button on the top left side of the

display for several seconds; however, this should never be required.

To unenroll the Touchpad navigate to the Settings menu and then to the section labeled

"Panel." Put the panel or BAT-Connect into wireless enrollment mode and press the

unenrollment button. Note: The unenrollment button is displayed only when the panel is in

enrollment mode.

When adding display into enclosure, camera should be on the left side.

Camera

USB connector