- ページ 2

タッチパネル Alula RE667のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alula RE667 13 ページ。 Slimline touchpad
Alula RE667 にも：マニュアル (12 ページ), マニュアル (12 ページ)

By default the Touchpad network list will show Connect+ and BAT-Connect access points. To

view all networks in range tap the "Show all networks" button at the bottom of the network

list.

4. Mount the Touchpad. Refer to section "Touchpad Mounting Options" for mounting

instructions.

5. Enroll the Touchpad by pressing the enroll button on the side of the panel until it beeps

once and then select the desired network.

Note: If connecting to a home network, enter router credentials at the Touchpad. After a

connection is established, the Touchpad will discover all devices on the network. Select

the desired panel. After selecting the desired panel, the Touchpad will progress through

stages of discovery and authentication. Upon success it will show the DISARMED screen.

If the wrong panel was selected, press the "Restart"button in the side menu.

Troubleshooting Steps if Enrollment Fails:

• Confirm the panel is disarmed and in wireless enrollment mode. A red light will flash on

the panel if in wireless enrollment mode.

• Check whether the panel is already full. The limit is four Touchpads. To confirm number

of Touchpads connected, log into your account.

• Tap the "Restart" button to tryagain.

6. If using cameras or user management features, you must log in to the Alula Cloud as

the account owner. To log in go to Settings and select Touchpad. Enter master code, then

select Alula Cloud. Sign in with your username and password.

Note: Internet access is required.

7. Test the Touchpad by arming and disarming the panel from the Touchpad.

72DF

9EF8