タッチパネル Alula RE667-ProのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alula RE667-Pro 12 ページ。 Slimline touchpad

ページを印刷する

Connect Family

The RE667-Pro Slimline Touchpad

for controlling the security system. It is AC powered and

communicates with the panel wirelessly.

Features

• Vibrant 7'' Android™ tablet display

• Provides local control of security and automation functionality

• Wall or table mounted

• Encrypted, Connect+™ and BAT-Connect™ enabled, battery-

backed Wi-Fi™ connection

Installation Overview for Connect+

1. Confirm the panel has a Wi-Fi DeviceLink card installed.

Note: DeviceLink hardware must be version D00 or newer. DeviceLink firmware must be

v0.6.6.0 or newer.

Installing the Wi-Fi DeviceLink Card

• Disconnect the panel's AC power and backup

battery.

• Install the Wi-Fi DeviceLink card in Slot 2 by

carefully aligning the nylon retention posts and

the 8-pin connector while pushing the card

firmly until all posts are fully seated.

• Reconnect the panel's AC power and backup

battery.

• Verify the Wi-Fi card LEDs are on.

2. Choose a mounting location. Touchpad can be mounted on a wall or tabletop.

3. Identify your network and verify signal strength before mounting it permanently.

1. Ensure the panel is powered.

2. Power the Touchpad by applying AC power.

3. Select the "Connect" option to see the available networks. If the "Connect" option is

not available, press "Setup" then "Factory Default". The Touchpad can be connected to

either the Wi-Fi DeviceLink card or the home router. Connecting to the home router will

give the Touchpad access to the internet which is required for camera control, weather

updates, and the ability to modify users.

4. Once a network is determined, verify the signal strength. If the signal strength displayed

is less than 35, relocate the Touchpad or Connect+ panel. If neither options are

available, install an RE621 Touchpad Range Extender.

Note: If connecting to a home network router, the Connect+ needs to be connected

to the same network via ethernet. The Touchpad cannot connect to the panel over an

unsecured or open network.

RE667-Pro Slimline

Touchpad

is an intuitive interface

DeviceLink Card manual

Power

Input

Scan QR code for Wi-Fi

Slot

Backup

Battery