温度コントローラー Alula RE305のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Alula RE305 2 ページ。 Temperature sensor dsc compatible

Resolution Compatibles

The Temperature Sensor

overheat conditions. The sensor will alarm when the

temperature trip points are reached.

Features

• Indicates freeze and overheat warnings

• Industry-leading wireless range and battery life

• Secure encrypted wireless transmissions

• 5-year warranty

Enroll

the freeze input (ID ending in 0) by placing the

panel into wireless enrollment mode and then sending

an enrollment signal from the sensor.

Options for sending an Enrollment Signal

• Remove the battery tab and cover to trip

tamper

Overheat inputs and reed zones must be enabled to

function. Activate only as needed in order to extend

battery life.

To activate and enroll an overheat input (ID ending in

1):

• Remove magnet from reed switch

• Hold down tamper and install battery

Install

by mounting the sensor in the desired location

using two #4 or #6 screws. An optional cover-securing

screw is included. Alternatively, the sensor can also be

installed using 3M™ VHB™ tape.

Freeze or Heat alarms

temperature trip points are reached.

Temperature Trip Points

• Heat alarms when over 100°F (38°C)

• Heat restores when under 97°F (36°C)

• Freeze alarms when under 45°F (7°C)

• Freeze restores when over 48°F (9°C)

Use the panel installation guide to verify proper system setup.

RE305 Temperature Sensor

DSC

is used to detect freeze and

are transmitted when the

Compatible

Mounting Screw Holes

Cover-Securing Screw Hole