ページを印刷する
2.2 Pairing
Artone MIC is developped to work with
Artone streamer. However, it can also be paired
to other Bluetooth receivers.
1. Initiate the pairing sequence on your
receiver (consult the instruction manual of your
receiver).
2. Switch on the Artone MIC. The LEDs will
shine blue and red alternatively (this process
can can take up to 10-20 seconds, then the
pairing process is initiated).
3. When the pairing process is completed, the
operation will be confirmed by a sequence of
flashes of the blue LED.
2.3 Using the Artone MIC
2.3.1 Adjusting the sensivity of the Artone
MIC
Artone MIC can be used in situation of high
ambient
noise
and
environment.
a. situations with high ambient noise
(restaurant, group meeting etc.): put the
Artone MIC as close as possible to the
sound source (clip it to the speaker's
collar) and decrease the sensitivity on
the Artone MIC to desired level. The
lower the sensitivity level, the clearer the
sound will be. Adjust the volume setting
on your Artone streamer.
b. quiet "classroom" environment: put the
Artone MIC on a desk as close as
quiet
"classroom"