- ページ 2
モデム DKT WAVE2 POWERLINEのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DKT WAVE2 POWERLINE 2 ページ。
ページを印刷するDKT WAVE2
POWERLINE
Quick start guide
Installation of the first unit
Connect the first DKT WAVE2
PowerLine to the power outlet and to
your router/gateway/modem with the
provided Internet cable. After about a
minute, the first and third LED will
light amber and you're ready to enter
network name and password.
Add further units
First unit
Connect the unit to power. Wait until the lights turn amber.
Go back to the first unit. Press and hold the pairing/reset
button for 1-10 seconds, Do the same on the unit you wish
to connect. Wait for the LEDs to turn green and you are
good to go.
Info & further help
For further information and troubleshooting,
please visit our website
www.wave2.dk
DKT WAVE2 PowerLine
Power plug
(100V-240V,
50/60Hz)
Pairing/
Reset button
Network name (SSID) and password
Find and connect to
your new WiFi network
under settings.
Factory reset
To reset the DKT WAVE2 Air unit, press and hold the
Second unit
pairing/reset button for more than 10 seconds until all 3 LEDs
are blinking, then release it.
App
Download the DKT WAVE2 App and use it to update the
firmware, monitor your network and more.
Use your PC or
smartphone. Look for
the WiFi Network
named GUIDExxxxx,
and connect.
Type in the name
(SSiD) and password
of your new WiFi
network.
DKT WAVE2 App
for iOS
Power
LAN
WiFi
Gigabit
Internet port
95%
Settings
Wi-Fi
Wi-Fi
Guide_73300199
DKT WAVE2 App
for Android