- ページ 10

3Dプリンター Alunar R100-01のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alunar R100-01 11 ページ。 Lesser alunar 3d printers

Alunar 3D Printers

4. Menu Instructions

4.1 System

Info: Display the parameters of each shaft and the temperature of the nozzle.

About: motherboard information, system ID, version number, and sound on/off.

中/EN: language switching between Chinese and English.

Default: Restore factory settings.

TP Adjust: to adjust touch point, the calibration can be carried out when touch

failure.

WIFI: support WIFI online printing, but not included in the default configuration.

Back: Return to start screen.

4.2 TOOL

Manual: manually adjust the position and distance. Manual cannot be selected

during printing.

Preheat: to preheat the nozzle, which can be used to manually extrude downward or

upward.

Filament: to Load or unload Filament, nozzle should be preheated before.

Level: to adjust the distance between the printing plate and the nozzle. Press "NEXT"

to adjust 4 level points, Screw the adjusting nut according to the distance until the

four points leveling.

Fan: to adjust the fan speed of the nozzle and motherboard cooling.

Stop: press if wrong operation, the machine will stop moving.

More: spare port, used for the development of new function, now defined as laser

engraving port which is currently in development

Back: return to start screen.

4.3 Print

Press and choose ".gcode" file to start printing.

5. Install Software

Please view another DOC file "Cura15.04 Guide".

6. Print Quality Troubleshooting Guide

Please view another DOC file "Print Quality Troubleshooting Guide".

7. Contact Us

For more details and questions about Alunar 3D Prints, please contact us.

Website:

www.alunar.net

E-mail:

SKYPE: