送信機 Aluprof DC 448のPDF プログラミング・マニュアルをオンラインで閲覧またはダウンロードできます。Aluprof DC 448 4 ページ。
Aluprof DC 448 にも：プログラミング・マニュアル (4 ページ)

1. TECHNICAL SPECIFICATIONS

Power supply:

Frequency:

Operating temperature:

Average range:

It is compatible with all the DM series radio controlled motors and DC series control units from ALUPROF S.A. offer.

DC448 - 5-channels:

Possible of control of 5 motors or 5 groups of motors.

Company reserves the tolerance of catalog data due the different conditions usage.

2. DIAGRAM OF THE FRONT PANEL

MODE / K-

In accordance with the provisions of the Directive of the European Parliament and of the Council 2012/19 / EU of 4 July 2012

on waste electrical and electronic equipment (WEEE), it is prohibited to place of used equipment together with other wastes,

marked with crossed out wheeled bin symbol. The users are obliged to transfer their used equipment to a designated collection

point for proper processing. The marking means, at the same time, that the equipment was put on the market after 13 August

2005. These legal obligations have been introduced to reduce the amount of waste generated from waste electrical and

electronic equipment and to ensure an appropriate level of collection, recovery and recycling. The equipment does not contain

any dangerous components, which would have any particularly negative impact on the environment and human health.

We reserve the right to any technical change.

Valid on 2022.02.09

INSTRUKCJA PROGRAMOWANIA NADAJNIKA DC448

PROGRAMMING MANUAL OF THE DC 448 TRANSMITTER

3 V (1xCR2430)

433.92 MHz

~ -20°C - ~ +55°C

200 meters (in open space), 35 meters (inside buildings)

DOWN

OK / K+

Operating mode

Discharged battery

STOP

Week days

Clock

Roller shutter move - UP

Active channel

Roller shutter move - down

Active channel