- ページ 4

電動工具 Cutting SQ50EのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cutting SQ50E 7 ページ。 Pipe threading machine

conduit and rod (bolt stock) and rotates it while threading, cutting and reaming operations are

performed. Threading dies are mounted in self-opening die heads. An automatic oiling system

is provided to flood the work with thread cutting oil during threading operations.

Specifications

Threading Capacity ....... Pipe 1/2" through 2"

Chuck ............................ Speed Grip Chuck with Replaceable Jaw Inserts

Rear Centering Device....Cam Action Rotates with Chuck

Operating Speed ............ 38 RPM

Motor:

Type..................... . . ...... Universal type

Power.......... . . . . . . ...... 1500 Watts

Volts ..................... . ........115V / 230V Single Phase AC 50Hz / 60 Hz

Controls ................... .......ON /OFF Switch and ON/OFF Foot Switch (optional part)

N.W..................... . ..........74kg

Operating Instructions

Installing Pipe In Threader

Relevant parts' name, please refer to the photos within this manual.

Adding threading oil in the oil reservoir, when the machine is switched on, the oil will

automatically cycle.

1. Check to insure the cutter, reamer and die head are swung to UP position.