- ページ 12

ラボラトリー機器 DLAB Scientific Instrument MS-PBのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DLAB Scientific Instrument MS-PB 18 ページ。 Magnetic stirrers

run.

7. Stirring

The function "stirring" of LED digital model is switched on

or off via pushing on/off speed control knob. The speed

range of 100 to 1500 rpm and in steps of 10 rpm.

The function "stirring" of classic model is switched on or

off via rotating speed control knob. The speed range of 0 to

1500 rpm.

•

Instruments can't be power ON

- Check whether the power line is unplugged

- Check whether the fuse is broken or loose

•

Fault in power on self test

Switch OFF the unit, then switch ON and reset

the instruments to factory default setting.

•

Stir speed cannot reach set point

Excessive medium viscosity may cause abnormal

speed reduction of the motor

•

Unit cannot be powered off when switched off.

Check if the residual heat warning function is still

ON and hotplate temperature is above 50℃ (the

LED screen still work and "Hot" flash).

these

faults

are

manufacturer/supplier.

not

resolved,

please

contact