- ページ 8
改札口 dlb AIJGO-22/COMPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。dlb AIJGO-22/COMP 14 ページ。 Personal grounding tester with platform, double dual foot electrode and entrance gate with turnstile
ページを印刷するIf you want to set an upper resistance limit of
100 MΩ for measuring the footwear system,
cover both spikes of the tester's TH2 spike pair
by short-circuiting them. To do this, you can use
7.
the jumper which is on one point of the tester's
TH2 spike pair. After setting a different limit
from the one used previously, the device must
be restarted for the change to take effect.
Ask a qualified electrician to connect the
gate to the EPH network of the building. For
8.
information on connecting the fire alarm wiring,
see below.
Emergency open wiring guide
The connectors must be short-circuited and not energised, as this will cause the
panel to fail.
Turnstile control system
Emergency open (Input)
8