ページを印刷する6. For quick or delicate blending tasks, turn the speed knob to T position and hold for a few seconds and then
release, the knob will reset to O position automatically. Operate several times until the consistence you
want is obtained
7. If you want to add ingredients while the blender is working, remove the measuring cup and place through
the lid opening. （See Fig.7）
8. When crushing ice or hard food, keep one hand firmly on the lid.
9. When the consistence you desire is obtained, turn the knob to O position.
Note:
1) For each use, the consecutive operation time should not exceed 2 minutes. At least 10
minutes rest time must be maintained between two continuous cycles, let the unit cool to
room temperature before performing next operation cycle.
2) If you want to stop the machine during operation, turn the knob to O position anytime.
Fig.6
Important operating tips
·For best circulation of food that are to be blended with some liquid, pour the liquid into the jar first, then add
solids.
·Some of the tasks that cannot be performed efficiently with a blender are: beating egg whites, whipping cream,
mashing potatoes, grinding meat, mixing dough, extracting juice from fruit and vegetable
·The following items should never be placed in the unit as they may cause damage: bones, large pieces of
solid, frozen food, or tough foods such as turnips.
·To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes one by one through
the lid opening.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don't let food dry on the jar assembly as this will
make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to T position for a few seconds. And then
empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit, to detach the blade assembly by
turning it clockwise from the jar base bottom, and remove the blade assembly (see fig.8). In addition,
detach the jar cover seal ring 1 from the jar cover.
Before blending, add
food to be blended
into the jar.
11
During blending, add the
ingredient through the lid
opening.
Fig.7