- ページ 5

ドッキングステーション DLO TransDock microのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DLO TransDock micro 11 ページ。 Fm transmitter for ipod
DLO TransDock micro にも：ユーザーマニュアル (11 ページ), ユーザーマニュアル (11 ページ), ユーザーマニュアル (11 ページ), クイック・スタート・マニュアル (11 ページ), クイック・スタート・マニュアル (11 ページ), ユーザーマニュアル (11 ページ)

Finding Empty Radio Frequencies Using IntelliTune

If you live in a big city with a lot of FM radio stations, ﬁnding an empty FM fre-

quency can be tricky. DLO's IntelliTune simpliﬁes the process by doing all the

work for you.

To ﬁnd an empty frequency using IntelliTune:

1. Press the dial on TransDock micro. This will activate the IntelliTune search.

While it is searching, the word

micro's display.

2. Once IntelliTune finds an empty frequency, it will display

TO XXX.X

. Then, tune your FM radio to that station and begin enjoying

your iPod music over your car stereo.

TransDock micro also allows you to manually tune the

transmitter to desired FM frequencies. To do so, simply turn

TransDock micro's dial to the right to tune to higher stations

and left to tune to lower stations.

8 |

DLO TRANSDOCK MICRO USER GUIDE

All manuals and user guides at all-guides.com

INTELLITUNE

will appear on TransDock

TUNE RADIO

See drawing B

Tips for manually ﬁnding an empty station:

• Be sure to search the entire spectrum of FM frequencies, from 88.1 to 107.9.

Don't just look to the low end of the dial. There are often empty FM stations

in the 100's that work well.

• When using scan/seek on your car's radio, if your tuner stops on 101 and

then jumps to 103, look in the 102 frequencies for empty stations.

• Try tuning to a strong station, then backing down two frequencies - for

example 103.5 to 103.1. You can often find empty frequencies this way.

If that frequency is taken, scan to the next station and try again.

NOTE:

You can also visit

www.dlo.com/openFM

frequencies in your area.

to ﬁnd the best FM

| 9