ページを印刷する
Your heater should be checked once a year by a qualified
technician. Take special care to retighten any fixtures or nuts and
bolts that have come loose.
Square
metal
support
Bolt
Stand
Fig.C
Post
Bolt
Nut
Fig.D
Nose cone
sealing washer
Fig.B
5.
Place the 3 post brackets into
position on the base. Use three
M8 x 16mm bolts to join the
post brackets to the stand.
(Figure C)
6.
Place the post on top of the
3 post brackets. Use six M6
x 35mm bolts and nuts to
connect the post to three post
brackets. Tighten the bolts and
nuts securely. (Figure D)
3