- ページ 8

ホブ Alva GDH101のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alva GDH101 17 ページ。
Alva GDH101 にも：マニュアル (18 ページ)

After installation the space under the hob must be at least 30mm.

The distance between the hob and the wall must be at least 35mm.

If an extractor hood is to be used the distance between the top of

the gas hob and the bottom of the hood must be at least 650mm.

If this appliance is not being installed in a built-in structure, there

should be an insulation layer between the appliances bottom and

other components

LPG (Liquid Petroleum Gas) installation

•

Soak the end of the gas-supply hose in hot water to soften it.

•

Then push the hose end fully over the gas-supply nozzle located

at the rear of the hob (see picture below).

•

Secure the hose by tightening the hose clamp (see sketch below)

•

Similarly, secure the other end of the hose to the regulator on the

gas bottle.

NOTE: After installing and connecting the hose to the hob and

regulator, and the regulator to the gas cylinder, a gas leak test must

be performed as detailed on page of the booklet.

NOZZLE

CLAMP

AND HOSE