- ページ 6

プロジェクター 3M 9700のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。3M 9700 15 ページ。 Operating instructions

Set Up Projector

1. Set projector down on table. To remove travel

cover, lift up at back and slide cover off.

2. Hold projector above table top. Lift up on both leg

release latches to unfold legs and mirror pan.

1. Unplug power cord from electrical outlet.

2. Lower projection mirror to closed position.

3. Push head release button and rotate head 90 until

it locks into position.

4. Release post latch and lower post until it stops and

locks in the post cradle.

5. Rotate focus knob counterclockwise to lower head

until it stops.

6. Lift projector by carrying handle and set down on

travel feet.

7. Push on leg tab to fold and lock each leg into

projector body.

3M 9700 Operator's Guide

3. Set projector down on table. Lamp will not

illuminate unless folding legs and mirror pan are

completely down.

4. If equipped with Flip-In Magnifier, rotate focus

knob to raise lens away from projector body.

5. Release post cradle latch and lift post to upright

position. Post will lock into place.

6. Push head release button and rotate head 90 until

it locks into place.

7. Grasp mirror lift tab and raise projection mirror.

8. Slide travel cover over projector body. Push down

on back edge of cover to lock in place.

9. Coil power cord and insert into front space of travel

cover.