ページを印刷する
DRILL TEMPLATE
Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
Top jack layout requires the use of closed-frame jacks like the
not fit in layouts with 5 or more knobs due to the placement of the DC jack in the center.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
ZELUS DISTORTION/SUSTAINER
5mm LED
bezel, available from several parts suppliers. Adjust
125B
0.625"
0.625"
ø3/8"
ø1/2"
OUT
DC
TONE
MIDS
x: -0.775, y: +1.71
x: 0, y: +1.71
ø9/32"
ø9/32"
VOLUME
FOCUS
x: -0.775, y: +0.41
x: 0, y: +0.41
ø9/32"
ø9/32"
CENTER (0,0)
LED
FOOTSWITCH
x: -0.775, y: -1.20
x: 0, y: -1.20
ø5/16"
ø15/32"
Switchcraft
111X. Open-frame jacks will
ø3/8"
IN
SUSTAIN
x: +0.775, y: +1.71
ø9/32"
PREGAIN
x: +0.775, y: +0.41
ø9/32"
7