- ページ 6
コントローラー DNF Controls 4000CL-OのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DNF Controls 4000CL-O 19 ページ。 400 video clip fast access system with odetics protocol
ページを印刷する4.
VIDEO SERVER SETUP
a.
Select ODETICS Broadcast communications protocol on the VIDEO SERVER to be
controlled.
b.
Assign a serial port on the VIDEO SERVER through which the ST300 will control the
server.
NOTES: The VIDEO SERVER may not support LTC or VITC time modes in ODETICS
Broadcast mode. The ST300 will default to Tape Time if a non-supported time mode is selected
on the ST300.
The Grass Valley Group PROFILE does not support search to a time location using Timecode
(LTC or VITC) in ODETICS Protocol. Tape Time mode (TM) must be selected on the ST300.
In ODETICS Broadcast mode, the VIDEO SERVER may O
ASSEMBLE record modes may be disabled.
Setup is complete.
5.
LOAD A CLIP
a.
Select a VTR by pressing VTR [1], VTR [2], VTR [3], or VTR [4].
b.
Press [CLIP LIST] to view the list of CLIP IDs that are resident on the Video Server.
The CLIP LIST indicator will turn on.
c.
Turn the Wheel to view the existing CLIP IDs on the video server.
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available CLIPs. Backward scrolling is limited to the last 10 CLIP IDs
viewed.
OR
Manually enter a CLIP ID using the ST300 numeric keypad, or PC keyboard (if KBIO
option).
d.
Press [LOAD] to load the selected CLIP ID for playout.
e.
Repeat steps a. thru d. to load clips on desired VTRs.
f.
Set the GANG mode, if required.
6.
VIEW THE CLIP ID OF THE CURRENTLY LOADED
CLIP
Press [SHIFT] + [LOAD]. The bottom line will show the name of the loaded clip.
6
4000CL-O, 400 Clip Fast Access System, Odetics Protocol
allow Full Record. INSERT and
NLY