- ページ 9
ネットワークカード DNF Controls MAV-555のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DNF Controls MAV-555 20 ページ。 250 clip fast access system with peripheral bus interface option sony dp protocol for sony mav-555 video servers
ページを印刷する10. PBIO ENABLE/DISABLE
On the ST300, press the [PBIO] key to enable or disable PBIO. When disabled, the ST300 will
ignore all Pbus commands. When enabled, the ST300 will respond to all Pbus commands.
When enabled and Pbus commands are received, the key's LED will flash.
11. TRIGGERS FROM THE PRODUCTION SWITCHER
Firing a trigger, using either the Timeline or Run function on the production switcher, causes the
ST300 to put the Video Server into the following modes, based upon the trigger value:
GRASS VALLEY GROUP
Trigger Value
0
1
2
3
4
5
6 or greater
SONY
Trigger Value
0
1
2
3
4
5
6 or greater
To control more than one VTR, enable the Peripheral Device Address for the required VTRs. The
Trigger will be sent to the enabled devices.
OR
GANG the required VTRs on the ST300. See the Menu Table for GANG instructions. Enable the
Peripheral Device Address for one of the GANGed VTRs. The Trigger will be sent to the enabled
VTR. The other VTRs in the GANG will perform the same action.
9 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
Mode
Play
Recue to beginning of clip
Slo-mo using ST300 Preset Speed
Reverse Play
Still Frame
None
Play
Mode
Recue to beginning of clip
Play
Slo-mo using ST300 Preset Speed
Reverse Play
Still Frame
None
Play