- ページ 9

プロジェクター 3M Multimedia Projector X70のPDF 安全マニュアルをオンラインで閲覧またはダウンロードできます。3M Multimedia Projector X70 13 ページ。 3m x70: quick start
3M Multimedia Projector X70 にも：製品安全マニュアル (6 ページ), 仕様書 (2 ページ)

ページを印刷する

Replacing Lamp

•

To reduce the risk associated with hazardous voltage, which if not avoided

could result in death or serious injury:

Switch power "OFF" and disconnect the plug from electrical outlet before

attempting any cleaning, lamp replacement, or other maintenance of this unit.

Grasp plug and pull to disconnect.

•

To reduce the risk associated with the hot surface temperatures produced by

the projection lamp, which if not avoided may result in death or serious injury:

Never touch the projection lamp or surrounding surfaces while the lamp is still hot.

Switch unit "OFF", remove the power cord from the electrical outlet, and allow the

unit to cool for at least 45 minutes before replacing the lamp.

•

To reduce the risk associated with explosion associated with a pressurized

lamp when hot, which if not avoided could result in death or serious injury:

Do not improperly handle, scratch, strike, or drop the lamp at any time.

•

To reduce the risk associated with the sharp metal fittings or broken glass

inside the lamp compartment, which if not avoided may result in minor or

moderate injury:

Do not insert hand into the lamp compartment when the lamp has been removed.

Use extreme care when removing lamp glass that has failed and shattered into

sharp pieces.

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: After making sure that the projector has cooled adequately, slide the

knob (1) of a lamp door lock as shown in the figure. Then, one side of the lamp door(2) is raised.

Pull up the lamp door and remove it, as shown in the figure.

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

WARNING

CAUTION

√

3M™ Multimedia Projector X70/X80 Product Safety Guide

Note