- ページ 5

投影スクリーン DNP Supernova OneのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DNP Supernova One 8 ページ。 Optical front projection screens
DNP Supernova One にも：インストレーション・マニュアル (2 ページ)

ページを印刷する

5. Mount the screen

Lift the screen up against the wall,

slightly higher than the brackets.

Then let it slide down on the

brackets until they are firmly in

position. Only tilt the screen slightly

during this operation, as it can

loosen the brackets.

Now press the lower part of the

screen lightly into the wall, so that

the screws on the magnets leave a

mark on the wall. Remove the

screen, drill a hole where the marks

were made and mount the magnets

in the wall using wall plugs and

screws.

Remount the screen following the

previous procedure. If there is no

contact between the screen and the

magnets, remove the screen again

and slightly unscrew the magnets.

The optimal horizontal position of

the frame can be reached by sliding

the frame horizontally on the

brackets.

5/8