- ページ 5

ネットワーク・ハードウェア Blue Coat ProxySG 9000 SeriesのPDF コンプライアンス・マニュアルをオンラインで閲覧またはダウンロードできます。Blue Coat ProxySG 9000 Series 14 ページ。

Label Replacement

If you incorrectly apply a label onto the appliance or need to replace an existing label,

you must thoroughly clean the label surface to remove all traces of the adhesive before

attempting to reapply a label. If the adhesive is not completely removed, the new label

will not correctly adhere to the surface.

To clean the adhesive residue and other contaminants after a label is removed:

Step 1: Remove traces of the silicone adhesive evidence by throughly cleaning the

Step 2: Remove any remaining surface contaminants using a cotton round.

Step 3: Repeat if necessary.

If the Blue Coat appliance is already rack-mounted and operating, Blue Coat

recommends powering it down, removing the system from the rack, and creating a

workplace with ample room to maneuver around the unit.

surface using an alcohol swab.

SG9000 Tamper Evident Panel and Label Installation