- ページ 2
コンピュータ・アクセサリー Doberman Security SE-0212のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Doberman Security SE-0212 4 ページ。 Pc data lock
ページを印刷するFigure 3
Once the software
installation is completed,
click the Confirm button.
Password Setting:
After the software driver installation is completed, the screen will look
similar to the picture above. The PC Data Lock software
accommodates up to 64 alphanumeric characters in password.
Please note that the alphanumeric characters in each password are
case insensitive.
You will be asked to re-confirm the password. If the password is
correctly set, click the OK button to continue the step of product ID
validation. If the password is set incorrectly, an error screen will
appear, click the Restart button to re-enter the password.
Product ID Validation:
An ID Validation procedure must be completed prior to using the product.
Validation Procedure:
Please make sure the transmitter
is turned off.
After the password is
successfully set, the following
window will display on the screen
indicating that the validation is in
progress. The transmitter may
now be turned on.
The following pop-window
indicates that the ID validation
process is complete.
If the time limit is exceeded
during the validation process,
identify the cause and take
appropriate action
Causes for exceeding time limit
1. Transmitter is off
2. More than two transmitters nearby Follow Validation procedure to re-validate
3. RF interference
Software Removal
There are two ways to uninstall the PC Data Lock software:
Click the Start button, select the
All Programs menu button, and
then select the Uninstall option
in the Wireless PC Lock menu.
Click the Start button, select the
Control Panel menu button,
click the Add or Remove
Programs icon, and then select
the Window Wireless PC Lock
program in the Add/Remove
menu.
Actions
Turn on transmitter and makes sure the LED blinks
Move transmitter closer to receiver until receiver's LED blinks
2