ページを印刷するSPECIFICATIONS
Operating pressure
Dimensions
Length (without air plug) × Height × Width
Weight
Pin capacity
Air consumption
Air inlet
PIN SELECTION
Only pins shown in the Table below can be driven with this Nailer.
NOTE: Use only genuine ET&F pins to assure nail quality and driving ease.
Wire-collated coil pins
Sheet-collated coil pins
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
11-1/16" × 11-7/8" × 5-1/8"
(281 mm × 302 mm × 130 mm)
5.9 lbs (2.7 kg)
200 – 300 pins (1 coil)
.052 ft
3
/cycle at 100 psi
(1.5 ltr/cycle at 6.9 bar)
(1.5 ltr/cycle at 7 kgf/cm
1/4 NPT Thread
Min.
.240"
(6.1 mm)
.104"
(2.64 mm)
Min.
.268"
(6.8 mm)
.104"
(2.64 mm)
— 7 —
2
)
2
)
Max.
.252"
(6.4 mm)
.107"
(2.74 mm)
Max.
.275"
(7 mm)
.107"
(2.74 mm)