- ページ 5

室内暖炉 docherty STOVAMORE MONZAのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。docherty STOVAMORE MONZA 12 ページ。 Fireplace stove

Please pay special attention when handling the ashpan and when removing hot ash due

to danger of burns! The hot ash must not get in contact with flammable objects -e.g. when

throwing in communal waste containers.

When the fireplace stove is used only seasonally and with unfavourable draught or weather

conditions, special attention must be paid when putting the stove into operation. When the

fireplace stove is not in operation for a longer period of time, the flueways must be checked

for obstructions before further operation.

Handling

Adequate facilities must be available for loading, unloading and site handling. This appliance

is heavy and must be handled with care.

Fire Cement

Some types of fire cement are caustic and should not be allowed to come into contact with

the skin. In case of contact wash immediately with plenty of water.

Asbestos

This stove contains no asbestos. If there is a possibility of disturbing any asbestos in the

course of installation then please seek specialist guidance and use appropriate protective

equipment.

Metal Parts

When installing or servicing this stove care should be taken to avoid the possibility of personal

injury.

3.1 Safe distance:

200mm to sides

200mm to rear

800mm in front of the centre point of door assembly

Any storage area built into the appliance must not be used to store any combustible materials.

The installation must comply with current Building Regulations, National and European

Standards, Local Authority byelaws and other specifications or regulations as they affect the

installation of the stove. The most stringent clearances to combustibles should be applied.

3.1.2 Safe distance of chimneys from flammable materials and building constructions

Follow Building Regulations and Manufacturers instructions for the type of chimney, the

most stringent clearances should be applied.

Unless the fireplace stove is installed on a 100% non-flammable floor with a superimposed

hearth or change in level reference Building Regulations Document J section 2.22 – 2.30, it is

necessary to place the stove on a non-flammable insulation mat, e.g. metal plate, ceramics,

hardened glass, stone (at least 12mm thick) and be capable of supporting the weight of the

appliance. The hearth should extend 150mm to sides and rear of the appliance and 300mm

in front of the appliance.

Items made of flammable materials may not be placed on top of the hearth or at a less-than-

safe distance from the fireplace stoves.

Minimal distances:

A > 80cm

B > 20cm