- ページ 8
ボート用品 DockCraft DockSiderのPDF 組み立て、設置、セットアップ、操作説明書をオンラインで閲覧またはダウンロードできます。DockCraft DockSider 12 ページ。
ページを印刷するInstallation Procedure for Your - Series 100 Docksider
Now that the Mounts are in place; Mount the Cradle Assembly to them.
If the distance to the water from the dock decking is:
10 to 22 inches: insert clevis pin in the 2nd hole of the pivot lateral into the top Slot of the mounting
bracket.
17 to 29 inches: insert clevis pin in the 2nd hole of the pivot lateral into the bottom Slot of the mounting
bracket
20 to 31 inches: insert clevis pin in the 4th hole of the pivot lateral into the top Slot of the mounting bracket
25 to 37 inches: insert clevis pin in 4th hole of the pivot lateral into the bottom Slot of the mounting
bracket
Adjust if required - up or down - based on your specific watercraft or if your water level changes
significantly throughout the season.
To "Lock" the Brackets and Pivot Laterals together insert "Locking Pin" on both sides of unit.
If Clevis Pin with Circular Retaining Ring in Hole 2 or 4 of Pivot Lateral is seated in the Top Slot.
Kayak Storage Rack to Water Level Adjustment:
Setting for Water Level to Decking
20 to 31 Inches
Bottom Slot
Bottom Hole
nd
Insert 2
Clevis Pin through hole in bracket
and secure with
"R" Retaining Clip on opposite side.
Page 8 of 12
4th Hole
Top Slot