- ページ 12

プロジェクター 3M X76 - Digital Projector XGA LCDのPDF 製品安全マニュアルをオンラインで閲覧またはダウンロードできます。3M X76 - Digital Projector XGA LCD 17 ページ。 3m digital projector x76 quick setup
3M X76 - Digital Projector XGA LCD にも：クイックセットアップ (1 ページ), 仕様書 (2 ページ), 取扱説明書 (18 ページ)

ページを印刷する

3M X76 - Digital Projector XGA LCD 製品安全マニュアル

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide

the lamp door to the side to remove it. (2)

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by

arrow) . (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place.

Optional Lamp: 78-6969-9947-9

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

Note

(Contact 3M Customer Service.)

(DT00911)

Note

(2) Lamp access door

(3) Screws

(4) Handle