- ページ 9

PCIカード Acqiris U1084AのPDF スタートアップマニュアルをオンラインで閲覧またはダウンロードできます。Acqiris U1084A 20 ページ。 Acquisition card, 8-bit, up to 4 gs/s and 1.5 ghz bandwidth

Return a Card for Service

Should it become necessary to return a card for repair or service, follow the steps below:

1. Review the warranty information attached to the original quote or order confirmation from

Acqiris.

2. To obtain a Return Material Authorization (RMA) and return address, contact Acqiris at

[email protected], providing the following information:

4. Pack the card in its original ESD bag and packing carton. If the original carton is not avail-

able, use bubble wrap or packing peanuts and place the instrument in a sealed container

and mark the container "FRAGILE".

The shipment content and accessories depends on your order.

Please refer to the packing list for details.

Acqiris U1084A Startup Guide

To avoid damage when handling a card, do not touch any exposed

components or connector pins.

Product model number (for example: U1084A).

Product serial number (for example: AQ00070xxx, US00075xxx or MY00090xxx). The serial number

label is located on a sticker:

On the top edge of the card, for units shipped after July 2018.

On the side panel of the card, for units shipped before July 2018.

The serial number can also be read from the Soft Front Panel interface, but only after the

hardware and software are installed.

Name and address of owner (a P.O. box is not acceptable as a return address).

A description of the failure or service requested.

If any correspondence is required, refer to the product by serial number,

and model number or RMA number.

Step 2: Verify U1084A Shipment Contents