- ページ 4

ソーラーパネル AkoTec Weiser ProtectのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AkoTec Weiser Protect 20 ページ。

Safety in general:

Installation may only be carried out by qualif ied personnel in accordance with

the applicable regulations and standards. Improper installation can

lead to damage to the collectors and the entire system.

In addition to these important applicable standards, the national installation

regulations, legal regulations for accident prevention, environmental protection

and the professional associations must be observed, as well as the relevant safety

regulations of DIN, EN, DVGW and VDE.

DIN EN 1991-1-4

and DIN EN 1991-1-3

DIN EN 62305-3 and

DIN VDE 0185

EnEV

Transport and storage

- store tubes and collectors in a dry place until installation and store them in

their packaging to protect them f rom damage.

The surface must be level.

- do not load the tube and collector cartons f rom above, except for identical

cartons. Stack a maximum of 7 tube cartons on top of each other.

transport and store tubes and collectors horizontally, paying attention to the

top and bottom.

handle full-vacuum tubes carefully and only touch them with cotton gloves.

page 4

Notes

Please also refer to the planning and commissioning

instructions and the data sheet. Both can be downloaded f rom our

website.

https: //www.akotec.eu/english/downloads/

Fundamentals of structural design and effects on

supporting structures-snow loads and wind loads

Grounding and lightning protection

Insulation of pipelines