- ページ 15

モビリティ・エイド Etac Molift Air SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Etac Molift Air Series 15 ページ。

Symptom

The lifter does not respond to Hand control action Emergency Stop is activated. Deactivate by push-

The lifter does not respond to Hand control up

button

When using Electrical Emergency lowering the

lifting band goes upwards

Troubleshooting

Possible Cause/Action

ing button back in.

The lifters electronics is overheated.

Wait for it to cool down.

Hand control is not plugged in properly. Open

cover and plug in Hand control. Hand control or

plug or cord can be broken an should be replaced.

Lifting strap angle sensor is activated. Adjust

lifting strap or move hoist to reduce lifting strap

angle.

Lifting band has gone completely out, and has

been winded the wrong way.

Use manual emergency lowering. Send lifter to

service.