- ページ 7

クロスオーバー DOD SR 834のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DOD SR 834 10 ページ。 Sr series

MONO OPERATION

Depress the Stereo/Mono switch** (LED indicator lit). When operating the

crossover in mono mode, the HIGH-MID/HIGH frequency control range is from

800Hz - 9kHz.

The mono mode setup procedure is the same as for stereo mode, except that

the bottom row of markings on the front and rear panels will be followed

instead of the top row. Be sure that the amplifiers are off, that the gain control

is set to 0 dB, and that the level control is set to -12 before proceeding to

adjust the crossover frequencies and levels. THE LOW FREQUENCY SUM

OUTPUT IS NOT USABLE IN THE MONO MODE.

** WARNING: BEFORE PRESSING THE ÷10, LF SUM OR STEREO/MONO

SWITCHES, LOWER THE OUTPUTS OF YOUR POWER

AMPLIFIERS TO AVOID DAMAGE TO DRIVERS AND

LOUDSPEAKERS.

SR Crossover