- ページ 2

ラジオ Clint BT-H1506のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Clint BT-H1506 7 ページ。 Internet/dab/fm radio with lan

ページを印刷する

1. Content of package

Please make sure that the following content are included in the package:

1. BT-H1503/1506 Digital Media Player Main unit

2. Power supply

3. BT-H1503/1506 User Manual

2. Before you start

Before you can use your internet radio, you need the following:

•

A broadband LAN internet connection.

•

A wireless access point connected to your broadband internet. Via a router is

recommended.

•

If your wireless network is configures to use WEP (Wired Equivalent Privacy) or

WPA (Wi-Fi Protected Access) data encryption, it is important that you know your

WEP or WPA code to connect to your network.

Depending on your wireless router the internet radio should work anywhere within up to

20-30 meters of the wireless access point.

Before continuing, make sure that your wireless access point is turned on and connected

to your broadband internet(LAN). Please refer to your wireless access point manual to get

this part working.

3. Overview of your BT-H1503/1506

After taking your BT-H1503/1506 out of the package, please spend some time to

familiarize yourself with its features.

3.1 Front Panel

3.2 Back Panel

LAN

4. Turning on BT-H1503/1506

Preparing BT-H1503/1506 for operation:

1. Place BT-H1503/1506 on a flat surface.

2. If you are accessing the internet via wired Ethernet LAN, place BT-H1503/1506

near Ethernet LAN access and proceed to 6. Setting up the BT-H1503/1506

5. General menu navigation

To navigate to the different menus you must use the ARROW buttons on the front panel

and the TUNE knob. This is general for all menu items. Use ARROW keys to find the

menu you wish to select and turn the TUNE knob to navigate to the desired menu item.

Then press TUNE knob to select. When menu item is selected pressing right ARROW key

will also confirm selection.

F.ex. to navigate to the MAIN MENU while in INTERNET RADIO MODE press left

ARROW button and the Menu is showing on display. Turn the TUNE knob until MAIN

MENU is selected. Press TUNE knob to select MAIN MENU.

Pressing MENU on front panel will take you to the Context Menu of the present mode of

BT-H1503/1506 (Internet, DAB etc.)

BT-H1503/1506 has numerous features which require a small degree of setup before

users are able to fully use all the functionalities of the radio. The Main Menu

Setup menu has a series of options that allow system-wide settings to be altered.

Mit FinePrint gedruckt - bitte bei www.context-gmbh.de registrieren.

- 5 -

Line Out

Power Input

System

- 7 -

VOL = By Turning VOL knob Volume level is set. By Pressing VOL knob MUTE is

activated/deactivated.

TUNE = By turning TUNE knob users can navigate through menus. By pressing TUNE

knob user confirms choice.

MENU = By pressing MENU the CONTEXT Menu of the current mode is displayed.

INFO = Displays the different INFO in current mode.

SHIFT = By pressing SHIFT preset buttons will change from 1-4 to 5-8. F.ex. pressing shift

and then long pressing PRESET 2 will save PRESET on preset 6.

= Pressing ARROW left will navigate back in the menus.

= Pressing ARROW right will navigate forward in the menus.

SOURCE = By pressing SOURCE the BT-H1503/1506 will change between the different

modes: Internet Radio, Music Player, DAB(BT-H1506 Only) & FM.

1 – 4 = Preset buttons for saving favourite stations (Internet Radio, DAB or FM for BT-

H1506)

POWER = Turns BT-H1503/1506 on/off

EARPHONE = Earphone out

These settings are:

Internet setup

Time setup

Software upgrade

Factory reset

Antenna

Please go to page 15 for System Menu (Step by Step).

6. Setting up the BT-H1503/1506 (Quick Guide)

The first time you want to connect to the internet to listen to radio stations, you will have to

set up the connection. This is done with the Internet Wizard. The radio has been

configured to automatically run the Internet Wizard when you enter the Internet Radio

mode (If a connection has not already been made).

Alternatively you can manually run the Internet Wizard if you want to connect to a different

Wi Fi network. This can be accessed from the System Setup

MAIN MENU.

The Internet Setup menu consists of 4 options:

Wizard, PC Settings, View Settings and Manual Settings.

6.1 Wizard:

1. Select the Wizard.

2. The Wizard will then automatically scan for available Wireless or Wired (LAN

Ethernet) networks and a list is displayed.

3. Turn the TUNE knob to either select desired network (SSID) or select one of the

three other options. Rescan (Performs a rescan for networks), Wired (Optional)

(Will select Ethernet) or Manual Config (Will allow user to manually configure the

Wireless setup).

4. If the network has no security the following messages appears – "Please wait

Connecting", "Please wait Acquiring address" and "Connected" The Internet Radio

menu will be displayed.

5. If the network has a security feature enabled the BT-H1503/1506 will prompt you to

enter the key or pass phrase. The security details must match the security

information configured in the wireless access point. The authentication type (WEP,

Open, WPA or WPA2) will automatically be detected.

6. Password Entry:

Turn the TUNE knob to display different sets of characters and numbers. Use the

ARROW buttons to move the flashing cursor to select the desired characters.

- 6 -

Setting

Enter the Internet Settings submenu

Enter the Time/Alarm setup submenu

Enter the Software Upgrade wizard

Performs a factory reset

- 8 -

Action

Internet Setup menu in the