- ページ 14

録音機器 DOEPFER Dark linkのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DOEPFER Dark link 20 ページ。 Usb/midi-to-cv/gate interface
DOEPFER Dark link にも：オーナーズマニュアル (20 ページ)

ページを印刷する

DOEPFER

• Octave

– MIDI controller # 0

– Value range: 0 - 6

(The pattern will be transposed up to 7 octaves, until it starts again with note „one".)

Since Dark Link's note range covers a maximum of 5 octaves, higher notes will be ignored and

produce „pauses" within the pattern. This effect can be used in a creative way to create musical

phrases.

Example: With the setting „octave 1", the played chord A3-C4-F4-G4 will produce exactly the same

pattern. Using „octave 2" instead results in the pattern A3, C4, F4, G4, A4, F5, G5 and so on.

(10) MIDI controller for CV4

If Dark Link receives a MIDI controller message (except bank controller # 0 and # 32) while in „learn mode",

the controller number of this message will define the controller number for CV4, for instance, the CV4

output of Dark Link will correspond to this controller number from now on. The controller message must be

sent on Dark Link's MIDI channel (see section „MIDI channel / Learn mode" on page 17).

Controller # 0 and # 32 (Bank Change) will be ignored and cannot be „learned".

Whenever Dark Link receives one of the MIDI messages listed in the table above, the parameter in questi-

on will be changed and Dark Link will return to normal play mode, i.e. the LED will stop flashing. Make sure

that no accidental MIDI messages appear while in learn mode (e.g. from a sequencer) as you alter the set-

tings of Dark Link by such MIDI messages. All parameter changes made while in learn mode are stored in

Dark Link´s non-volatile parameter memory. When Dark Link is turned on next time, the parameter settings

will be loaded from this memory.

3.5. The GLIDE knob

Dark Links GLIDE knob determines the time that a note needs to rise up or fall down to the next played

note. Simply turn the knob to the desired value to enable Dark Links glide function. The glide function

affects CV1.

3.6. Resetting Dark Link

In order to return to the factory settings of all parameters, you have to reset the device. This might be useful

if, for instance, you do not remember the last parameter settings (e.g. MIDI channel, reference note, con-

troller # for CV4, key assign mode) or if they are out of alignment. If your Dark Link seems to behave in

strange ways and you do not know how to solve the problem, resetting the device may help as the values

of all parameters will be restored after the reset.

Dark link

A popular effect – or better playing style – is "bending" one note's pitch

gradually to the next note. You get this effect (on a capable synthesizer)

when playing a new note before releasing the old one. This function is also

part of Dark Link. Synthesizers without this function can now be

"upgraded" to glide. Next to this, some vintage synthesizers loose their

built in glide capabilities when they are controlled by external CV/gate

signals (e.g. Moog Prodigy). These instruments will now benefit from Dark

Link's glide function.

Functions