- ページ 7

フロアマシン Clipper Norton CG 25 SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clipper Norton CG 25 S 12 ページ。

Before using the machine it is committed to inspect the machine.

It is not permitted to use the machine if the machine safety is not according the checkpoints below.

Use only extension cables for extending the main cable that are sized and marked in accordance

with the overall power consumption of the machine.

Electrical cables must be rolled entirely off of the reels.

Any damage to electric cables is not permitted.

Use an electrical power supply connection with earth connection.

Check if:

The safety functions and operating functions work correct.

The flexible coupling is not deformed or damaged.

The diamond / multiflail disc is not damaged

The protection cap is fixed properly and slides well.

There are not any loose nuts or bolts.

There is no damage to the dust hose and if it is connected well.

Make sure the power supply plug is pulled out of the machine.

Lay down the machine so it is lying on the handle. Make sure the machine will not fall back down. A

second person can stands on the handle to make sure it will not fall back down.

Loosen the 4 bolts with an appropriate key.

Remove the diamond or multiflail disc

Make sure the power supply plug is pulled out of the machine.

Lay down the machine so it is lying on the handle. Make sure the machine will not fall back down. A

second person can stands on the handle to make sure it will not fall back down.

Fix the diamond or multiflail disc underneath the adapter plate and turn on the 4 bolts with an

appropriate key.

4. Initial operation