ペットケア製品 Dog Care NONO REのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dog Care NONO RE 5 ページ。 Bark control collar

AB02 FAQ's

1. NONO RE Features

a. The NONO RE(Model AB02) Bark Control Collar features a compact size with a larger

more readable display screen. The three buttons on the top of the unit control on/off,

modes for vibration or static, and a sensitivity button to detect the volume of your dog's

bark.

2. Fitting the Bark Collar to your Dog.

a. First, to avoid any inadvertent shock, make sure the collar is turned off.

b. Place the bark control collar on your dog's neck and center the contact points

underneath their neck.

c. The contact points should be touching the skin. If your dog has a thick undercoat you

may need to separate the fur to make sure that both electrodes are touching their skin.

d. Check the tightness of the collar by inserting one finger between the end of the contact

point and your dog's neck. The fit should be snug but not constricting.

e. Recheck. Allow your dog to wear the collar for a few minutes and then recheck the fit.

3. What size dogs will it fit?

a. Our bark collar is recommended for dogs weighing more than 15 pounds with neck

circumference between 8 to 22 inches. generally fits dogs from 22 lbs to 100 lbs. The

neck size is adjustable from 8.8" to 20.8". The product is suitable for medium and large

dogs, but can be used on some small dogs.

4. Trimming the collar.

a. If the nylon belt is too long you can cut off the excess and then seal the edge by applying

a flame to the cut area. (Be sure to first remove the collar from your dog).

b. Be sure to allow for growth if your dog is young or grows a thicker coat in the winter.

5. ON/OFF Button

a. On the top of the collar press the power switch button for 1 second and release. When

the unit turns on the LED light will flash blue.

b. The vibration mode (blue) is the default for first time use.

NONO RE

Bark Control Collar

(Model: AB02)