- ページ 4

クックトップ Akril CooktopのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Akril Cooktop 6 ページ。 Splashback

Heat tolerance

Akril is classed as combustible material and must not be

installed behind an open flame, cook tops or when the

temperature exceeds 118 °C.

Akril Panel has been engineered with a higher heat

resistance than standard Acrylic:

Vicat Softening Point - 118°C

Heat Distortion Point - 100°C

Do not leave your hot plate unattended. Radiant heat will

damage your Akril splashback.

A cook top left unattended for greater than 10 minutes will

cause damage to your splashback and therefore will not

be covered under warranty. Akril is tested to withstand

temperatures up to 100 deg for 10 minutes before failure.

Splashbacks

WET AREAS

Akril is ideal for use as a wet area splashback.

Most local bodies now require a waterproof barrier to the area immediately behind a splash zone (bathroom vanity, bath

etc). In this area Akril is fully compliant with all council requirements.

KITCHENS

Akril makes an excellent splashback for areas behind bench tops. However, due to the differing specifications of cook

tops and their ability to deflect large amounts of heat, Akril is not recommended for use as a splashback in the critical

heat zone in areas immediately behind cook tops.

In this application it is recommended to cut Akril to the edge of the appliance and within 200mm of the periphery of the

nearest heating element.

Akril is not recommended for use behind gas hobs or burners. It is recommended an non combustible material goes

behind the cook top

150mm high or more complying to the appropriate Australian Standard. Akril can be used past the point of 150mm high

from the bench top. Alternatively an non combustible material could be used all the way up.

All installations must comply with AS/NZS

5601.1— 2008 Gas installations .