ページを印刷する
When installing wall panels, make sure the connecting panels are at a 90
degree angle vertical to the ground and a 90 degree angle perpendicular to
each other. Tilting in any way may cause damage to the groove.
KEEP DOGIPOT
BUNKHOUSE CLEAN FOR A HEALTHY PET
®
It is very important to keep the DOGIPOT
absorbent material and the easy-to-assemble design will be appreciated when it is time to clean
the DOGIPOT
Bunkhouse.
®
Remove one side of the roof panels by reversing the last 3 steps of the assembly instructions,
which will allow you complete access to the entire inside of the DOGIPOT
We recommend using a detergent with strong grease cutting capabilities that is safe to use
around you, your children and your pets. Upon completion of washing, rinse and then wipe
down the panels. Don't forget to clean the inside of the roof panels. All the interior to air dry
thoroughly before reassembling.
Once the DOGIPOT
Bunkhouse is clean and dry, reassemble the roof panels.
®
Parts List:
Wall Panels - 18
Wall Columns - 4
Floor Panels - 4
Roof Panels - 4
Roof Side Rails - 4
Roof Top Rail - 1
Bunkhouse clean for the health of your pet. The non-
®
Bunkhouse.
®
STEP 25
BB
16
STEP 27
Align the keyhole openings on the
roof rail (39) to the metal connectors
at the peak of the parts (27) and (28).
Press down and push forward until
the end of the roof rail is flush to the
edge of part 31
38
37
STEP 29
CC
STEP 26
36
35
STEP 28
28
39
27
31
COMPLETE