- ページ 5

シンセサイザー 1010 Music BitboxのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。1010 Music Bitbox 11 ページ。
1010 Music Bitbox にも: クイック・スタート・マニュアル (2 ページ)

1010 Music Bitbox ユーザーマニュアル
On this screen you can adjust each of the four parameters by turning the Control Knob closest to the
parameter on the screen:
Start
Together with
as a percentage of the entire sample length and designates the position in the clip where
playback will begin.
Length
Together with
in percentage of the entire sample length and designates what percentage of the clip after
the
See the
Mode
This parameter determines how the sample will playback with four different settings:
Trigger
Gate
Toggle
Repeat
Level
This parameter sets the gain for the cell and ranges from -96dB to +12dB. At the default
value of 0dB the volume remains unchanged.

Clip Actions

Clip Info
The
screen has several action buttons across the top. Touching these on-screen buttons will do
the following:
Del
Delete this sample from this cell. The file on the MicroSD card remains. This particular cell
will now be empty. Pressing this button will return you to the
More
View additional parameters for this clip on the
INFO will do the same thing.
Play
Trigger the clip playback just like touching the cell on the
P. 4
v. 1.0
Length
, controls what portion of the sample will play.
Start
, controls what portion of the sample will play.
Start
position will be played. The
Loop
parameter on the
Activate the clip by touching the cell, through a CV Trigger, or through
MIDI note on. Bitbox will start playback of the clip according to the
Size
(see More Clip Information below) and play through to completion. The
release has no effect.
Begin the clip playback in the same manner as
mode, playback will stop when you release the touch, the CV Trigger gate
goes low, or the MIDI note is released.
Begin the clip playback in the same manner as
events happen again, the playback will stop.
Begin the cell playback in the same manner as
will restart at the
activated. Releasing or deactivating the cell allows playback to continue to
completion of the clip.
Length
parameter also controls the loop length.
More Clip Info
Quant Size
interval while the cell is held down or
More Clip Info
Bitbox User Manual
©1010music 2016
Start
Length
screen.
Trigger
mode. But in
Trigger
mode. When these
Trigger
mode. The playback
Main
screen
screen. Pressing
Main
screen does.
is expressed
is expressed
Quant
Gate