- ページ 6

ペットケア製品 Dogtra 1900S BLACK EDITIONのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dogtra 1900S BLACK EDITION 14 ページ。 1 mile remote trainer by dogtra remote controlled dog training collars

ページを印刷する

2. How the Transmitter Buttons Work

BLACK EDITION

The transmitter for the BLACK EDITION single dog unit

has four buttons (one on the face of the transmitter, two on

the left side and one on the right side).

Nick

Button

Constant

Button

Nick Button

The "Nick" button is located on top on the left side of the

handheld transmitter. When the "Nick" button is pressed the

receiver emits a single pulse of electrical stimulation.

Constant Button

The "Constant" button is located on the bottom on the left

side of the handheld transmitter. Pressing the "Constant"

button gives continuous stimulation as long as the button is

pushed, for up to 12 seconds. If the button is not released

after 12 seconds, the stimulation will automatically turn off

as a safety feature. The collar will be ready to be reactivated

once the button has been released.

Pager Button

The "Pager" button is located on the face of the transmitter.

Pressing it will give non-stimulating vibration as long as the

button is depressed, for up to 12 seconds.

Pager

Button

On/Off

Switch

Transmitter Power ON/OFF

The button on the right side of the transmitter is the "ON/

OFF" button that activates the transmitter and LCD screen

only. To turn the transmitter on, press the "ON/OFF" button

on the right side of the transmitter until the LCD screen

illuminates. To turn the transmitter off, press the "ON/OFF"

button on the right side of the transmitter. When the LCD

screen displays "OFF" release the button.

3. Collar Fitting

The receiver/collar should be fitted so that the surgical

stainless steel contact points press firmly against the dog's

skin. When properly fitted, you should be able to fit a finger

or two snugly in between the contact points and your dog's

skin. When properly fitted, the receiver/collar should not

move on the dog. The best location for the receiver/collar

box is either side of the dog's windpipe.

A loose fit can allow the receiver/collar to move around

on the dog's neck. When this happens, the contact points

may rub the skin and cause irritation. If the receiver/collar

is too tight, the dogs may have difficulty breathing.